Ipi - Welch Allyn Connex VSM 6000 series Directions For Use Manual

128 Patient monitoring
•
6. Touch the Home tab.
The new alarm settings take effect immediately.

IPI

The Integrated Pulmonary Index (IPI) integrates four parameters and their interactions to
provide a numeric value indicating a patient's overall respiratory status. The integrated
parameters are etCO2, RR, SpO2, and PR. The additional status information provided by
IPI enables you to intervene before values of individual parameters reach levels of clinical
concern.
Note
Note
Note
The range of IPI is 1–10. These values can be interpreted as indicated in the following
table.
Index range
10
8–9
7
5–6
3–4
1–2
Source: The microMediCO2 Module - OEM Manufacturers' Integration Guide (p. 13), Oridion Medical 1987 Ltd.
Note
IPI frame
The IPI frame displays a numeric value from 1–10 as well as an alarm threshold and
control.
No breath detected alarm delay. Select the duration from the list box. This alarm
delay specifies the minimum duration of a no-breath condition to activate an
alarm signal. You can set the default in Advanced settings.
IPI is available for adult patients as well as three groups of pediatric
patients (1–3 years, 3–6 years, and 6–12 years), but it is not available for
neonatal/infant patients.
Pediatric patient subtypes appear on the Patient Summary tab and on the
Home tab as a label in the IPI frame, but they do not appear in the Patient
frame.
IPI is available only with the Continuous Monitoring profile.
Patient status
Normal
Within normal range
Close to normal range; requires attention
Requires attention and may require intervention
Requires intervention
Requires immediate intervention
The interpretation of a patient's IPI value might change in different clinical
conditions. For example, patients who have a history of respiratory
difficulties might require a lower IPI Low Alert threshold that takes into
account their diminished respiratory capacity.
®
Welch Allyn Connex Devices