Welch Allyn Connex VSM 6000 series Directions For Use Manual page 180

174 Patient monitoring
Continuous Monitoring profile
The size of the pulse rate frame and displayed measurements varies based on your
configuration.
The Continuous Monitoring profile also provides a visual indication of aging episodic
measurements (those more than 16 minutes old). When a pulse rate measurement
derived from NIBP is displayed for more than 16 minutes, the numeric on the screen
changes from its current color to gray. (See the timestamp in the NIBP frame for actual
time of this measurement.) After one hour, this measurement is cleared from the frame.
Intervals Monitoring profile
Spot Check profile
Set up pulse rate
Follow these steps to configure pulse rate parameter settings.
1. Touch the Settings tab.
2. Touch the Setup tab.
3. Touch the Pulse rate vertical tab.
4. Select the desired Tone volume.
5. Touch the Home tab.
The new settings take effect immediately.
Configure pulse rate alarms
Follow these steps to set alarm limits for pulse rate.
®
Welch Allyn Connex Devices