Welch Allyn Connex VSM 6000 Series Care & Routine Service

Hide thumbs Also See for Connex VSM 6000 Series:

Welch Allyn Connex VSM 6000 Series

Care & Routine Service

Maintenance and service

Replace the printer paper

The printer is located on the top of the monitor. Follow these steps to replace the roll of printer paper:

1. Grasp the two tabs and pull up to open the printer door.

2. Remove the empty core.

WARNING: Hot surface. Do not touch the printer mechanism.

3. Insert a new roll of paper.

Note: The paper roll must be installed as illustrated. If the paper roll is not installed correctly,

the printer will not print properly.

4. Thread the end of the roll past the roller so that it extends past the printer door, as shown.

5. With one hand, pull lightly on the paper to take up any slack. With the other hand, close the printer

door by pushing it down and into place until it clicks.

Be certain that the paper does not catch in the printer door.

Table of Contents

Do you have a question about the Connex VSM 6000 Series and is the answer not in the manual?

Page 1 Welch Allyn Connex VSM 6000 Series Care & Routine Service Maintenance and service Replace the printer paper The printer is located on the top of the monitor. Follow these steps to replace the roll of printer paper: 1. Grasp the two tabs and pull up to open the printer door.
Page 2 Welch Allyn Connex VSM 6000 Series Care & Routine Service Change the battery Before removing the battery, shut down the monitor. 1. Turn the monitor upside down to access the battery door. 2. Locate the battery cover, indicated by. 3. Press downward and slide to open the door.