Welch Allyn Connex VSM 6000 series Directions For Use Manual page 118

112 Alarms
Alarm messages
Incompatible Welch Allyn device.
USB Communication failure. Call for service.
Low battery 30 minutes or less remaining.
Low SpHb signal quality. Check sensor.
Low SpO2 signal quality. Check sensor.
Low perfusion. Check sensor.
Replace the SpO2 cable.
SpO2 mode only. Check sensor or cable.
SpO2 sensor expires in....
Unexpected restart occurred. Call for service.
Weight scale not functional. Call for service.
CO2 not functional. Call for service.
Filter line disconnected.
CO2 module temperature is out of range. CO2 might not be accurate.
Purging filter line.
Calibration is overdue. CO2 might not be accurate.
Factory service is overdue. CO2 might not be accurate.
CO2 auto-zero in progress.
Respiratory freshness timeout expired.
Replace RRa sensor.
RRa background interference detected.
RRa patient interference detected.
File system formatted on first-time startup.
Lost connectivity with host.
The patient has exited bed.
Patient turn overdue.
EarlySense not functional.
®
Welch Allyn Connex Devices
Priority
Very low
Very low
Very low
Very low
Very low
Very low
Very low
Very low
Very low
Very low
Very low
Very low
Very low
Very low
Very low
Very low
Very low
Very low
Very low
Very low
Very low
Very low
Very low
Low
High
Very low
Very low