Mount The Accessory Bin - Welch Allyn Connex VSM 6000 series Directions For Use Manual

48 Setup
8. Re-attach the cover.
a. Thread the sensor cable through the cutouts on the top right and bottom left of
b. Tighten the two retention screws.
9. Attach the system power cord to the wall unit. Do not plug the cord into an outlet at
this time.

Mount the accessory bin

1. Mount the accessory bin on the accessory bin bracket, then loosely wrap the excess
power cord around the accessory bin bracket.
the cover.
®
Welch Allyn Connex Devices