Environmental Specifications; Device Radio; Configuration Options; Vital Signs Monitor 6000 Series - Welch Allyn Connex VSM 6000 series Directions For Use Manual

236 Specifications

Environmental specifications

Operating temperature
Transport/storage temperature
Operating altitude
Operating humidity
Transport/storage humidity

Device radio

The device's radio operates on 802.11 networks. For information regarding the
configuration of network connections and recommended settings, see the best practices
documents at www.welchallyn.com/promotions/
Network_Installation_Best_Practices.htm.
Wireless network interface
Frequency
Channels
Security/encryption/authentication WPA2/AES (either EAP or PSK authentication)
Antenna
Wireless data rates
Protocols
Data transfer protocols
Modulation
Output power
Ancillary IEEE standards

Configuration options

Vital Signs Monitor 6000 Series

The monitor is available in multiple configurations.
50°F to 104°F (10°C to 40°C)
-4°F to 122°F (-20°C to 50°C)
-557 to 10,000 ft. (-170 m to 3,048 m)
15 to 95% noncondensing
15% to 95% noncondensing
IEEE 802.11 b/g, 802.11a
802.11 b/g: 2.402 GHz to 2.4835 GHz
802.11a: 5.125 GHz to 5.875 GHz
Up to 14 in 802.11b/g, up to 24 in 802.11a; country-dependent
Internal multiband PIFA
802.11b: 1Mbps or higher during vitals transmission only
802.11a/g: 6Mbps or higher during vitals transmission only
(approximately 2 seconds per reading)
UDP, DHCP, TCP/IP
UDP, TCP/IP
OFDM (802.11a/g), DSSS/CCK (802.11b)
40mW typical, country-dependent
802.11e, 802.11h, 802.11i, 802.11X
®
Welch Allyn Connex Devices