Sensor Identification And Selection - Siemens SITRANS FUP1010 Operating Instructions Manual

4. Clean an area 13 mm (1/2-inch) on either side of the sensors.
5. Clean an additional 13 mm (1/2-inch) along the length of the sensors.
5.2.2

Sensor Identification and Selection

Sensor identification
The sensor part number located on the front face provides a detailed identification. For
example, the Part Number:
①
②
③
④
FUP1010 IP67 Portable
Operating Instructions, 03/2012, A5E02951522-02
Note
Please note that the instructions show vertical mounting for clarity purposes only. Do not
install sensors on the top of a pipe.
①
Pipe
②
Cleaned Areas
Figure 5-5 Pipe Surface Preparation
Model
Hi Precision
NEMA w/F-Conn
Pipe Material
1011HNFS-D1H-UT1-S2
⑤
⑥
⑦
5.2 Sensor Wiring
means:
Size
Temperature
Agency Approved
Connecting
31