Appendix; Ordering; I/O Connections And Wiring; Table A- 1 Part Numbers And Connection Data - Siemens SITRANS FUP1010 Operating Instructions Manual

Appendix

A.1

Ordering

In order to ensure that the ordering data you are using is not outdated, the latest ordering
data is always available on the Internet: Catalog process instrumentation
(http://www.siemens.com/processinstrumentation/catalogs)
See also
Process instrumentation catalog (http://www.siemens.com/processinstrumentation/catalogs)
A.2

I/O Connections and Wiring

Terminal Block Wiring - FUP1010 IP67 Battery Powered 2 Channel/2 Path Weatherproof Flow Meter
Wiring
(Refer to manual drawing 1010WDP-7 sheet 2 of 2)
Note
Single Channel flow meters have the same terminal pin numbers and signals.
The terminal block wiring table applies to the part numbers listed below.
Table A- 1
FUP1010
FUP1010 IP67 Portable
Operating Instructions, 03/2012, A5E02951522-02
Part Numbers and Connection Data
1010WDP-7 (Sheet 2 of 2) Drawing
7ME3510
A
143