Siemens SITRANS FUP1010 Operating Instructions Manual page 149

● Drag to Accessories. Drag to [Communications], and click.
● Double-click the icon you selected for the connection.
Accessing the Installation Menu
Once the parameters are set, HyperTerminal automatically initiates Command mode. You
will see a blank screen.
1. Press <Enter> key a few times until you see [? For Help] on the screen.
2. Type: ? (question mark) and then press <Enter> key to see a list of the available
Use the MENU command (type [Menu] and then press <Enter> key) to access the top level
of the Installation Menu. You will see a screen similar to the example below.
Note
To facilitate connecting through modems, the [Menu] command times out after three minutes
of inactivity. To maintain a longer connection, type: Menu 1000 and press <Enter> key. The
optional number is the amount in minutes that the connection will be maintained. Typing
[Menu 1000] essentially keeps the interface active until you cancel it.
FUP1010 IP67 Portable
Operating Instructions, 03/2012, A5E02951522-02
Note
For easier access, create a shortcut to the connect icon from your desktop. Right-click on
the icon to open its dialog box. Left-click on [Copy] or [Create a Short Cut] and then move
the mouse cursor to a blank area on your desktop. Right-click to open dialog box and
then left-click on [Paste] to place a shortcut to the connect icon on your desktop.
commands.
Appendix
A.3 Site Setup For SITRANS F
147