Siemens SITRANS FUP1010 Operating Instructions Manual page 153

Closing the Terminal or HyperTerminal Program
You may now close the Terminal program. The file(s) you have downloaded are now saved
in the location you selected. You may now import the file you have saved into the
appropriate program (i.e., MS Word for site data, or MS Excel for Datalogger or Wave shape
data for graphing or analysis).
The Datalogger contains data that has its fields separated by commas. By using the file
extension ".csv" (comma separated values) suggested earlier, the data will import directly
into MS Excel without any further modification. For the wave shape data, the fields are
separated by spaces, therefore, it is best to save those files as .txt and then use the MS
Excel Import Wizard to select "Space Delimiters" for importation of the data.
Site data is downloaded in plain text and can be imported directly into MS Word.
To Clear Active Memory using the RS-232 Interface
1. Turn off power (if it is currently on). Turn power on. As soon as you apply power,
2. Press the <Right Arrow> and then the <Down Arrow> to switch the option list to: [Clr
3. To restore operation, press <MENU> to access the Installation Menu. Create a new site
To Clear All Saved Memory using the RS-232 Interface
Before proceeding further, it is essential to understand that this function eliminates all data
stored in RAM. This means that all saved site setups including the site data of a flow-
calibrated site will be erased! Also, the entire Datalogger file plus any custom factory or
user-created pipe or sensor tables will be eliminated. The impact of this is such that we
strongly recommend that you consult our technical service department before continuing
with this procedure. If you choose to continue, be aware that you will have to create a new
site setup, re-enter all site specific parameters including pipe or sensor tables, plus all
desired Meter Facilities entries.
1. Turn off power (if it is currently on).
2. Turn the power on. As soon as you apply power, type the @ character three times.
FUP1010 IP67 Portable
Operating Instructions, 03/2012, A5E02951522-02
immediately type the @ character three times. The prompt: [Clr Active Memory? No]
appears at the top of the screen.
Active Memory? Yes] Press <ENTER> to clear all Active Site Data (but not saved site
setups).
setup or recall a stored site setup. Re-select any Meter Facilities items (e.g., RS-232
setup parameters).
CAUTION
– The prompt: [Clr Active Memory?] appears at the top of the screen. Press the <Down
Arrow>.
Note
The prompt switches to [Clr Saved Data? No].
Appendix
A.3 Site Setup For SITRANS F
151