5.1.2
Connecting AC Power Adapter/Charger
Connecting the 1015BCK-1 (7ME39404PG00) Power Adapter/Charger
1. Connect the AC power cord to the AC cord input of the Power Adapter/Charger.
2. Plug the Power Adapter/Charger connector into the rear panel Auxiliary Power/Battery
3. Plug the Power Adapter/Charger AC plug into an AC power outlet.
①
AC Cord Input
②
Connect to Rear Panel Power Input Connector
③
Flow Sensor Channel 2
④
Flow Sensor Channel 1
Figure 5-1
Power Adapter/AC-Charger for Dual Channel Flow Meter
FUP1010 IP67 Portable
Operating Instructions, 03/2012, A5E02951522-02
Charger input connector.
⑤
Input/Output Connector
⑥
RS-232 Port
⑦
Battery Status Indicator
⑧
Auxiliary Power/Battery Charger Input
Connecting
5.1 Transmitter Wiring
27