Further Information - Siemens SITRANS FUP1010 Operating Instructions Manual

Introduction

1.4 Further Information

Edition
2/2010
3/2012
1.4 Further Information
The contents of these Operating Instructions shall not become part of or modify any prior or
existing agreement, commitment or legal relationship. All obligations on the part of Siemens
AG are contained in the respective sales contract which also contains the complete and
solely applicable warranty conditions. Any statements contained herein do not create new
warranties or modify the existing warranty.
Product information on the Internet
The Operating Instructions are available on the CD-ROM shipped with the device, and on
the Internet on the Siemens homepage, where further information on the range of SITRANS
F flowmeters may also be found:
Product information on the internet (http://www.siemens.com/flow)
Worldwide contact person
If you need more information or have particular problems not covered sufficiently by the
operating instructions, please get in touch with your contact person. You can find contact
information for your local contact person on the Internet:
Local contact person (http://www.automation.siemens.com/partner)
10
Remarks
First Edition
Second Edition of Operating Instructions for the SITRANS FUP1010 IP67 portable flow
meter. This document replaces all previous instructions for use.
The most important changes are as follows:
Updated "Forming the Internal Battery" procedure

Removed all references to External Battery Pack and Charger

Added Reflexor operating mode chapter

Updated Sensor label and sensor selection procedures

Added 2mA drop fault indication note

Added DIN pipe size table 2448 reference note

Added Empty Pipe Set procedure

Updated Troubleshooting Table

FUP1010 IP67 Portable
Operating Instructions, 03/2012, A5E02951522-02