Siemens SITRANS FUP1010 Operating Instructions Manual page 98

Functions
7.8 Analog Input Setup
Setting the Analog Current Input
The DC current input port must be enabled first. From the [Analog Inp Setup] menu proceed
as follows:
1. Access the [Iin1] option list by pressing the <Right Arrow> twice.
2. Move the cursor down to [Aux] by pressing the <Down Arrow> and then press <ENTER>.
96
This enables the port to receive an input current. The cursor moves to [4 mA].
FUP1010 IP67 Portable
Operating Instructions, 03/2012, A5E02951522-02