3. Use the edge of the Spacer Guide as a stop for both tracks to keep them parallel. Adjust
4. Loosen the chains enough to allow you to rotate the track assembly until the center of
FUP1010 IP67 Portable
Operating Instructions, 03/2012, A5E02951522-02
tracks as necessary.
①
Align tracks with Spacer Guide edge
②
Mylar Spacer Guide
③
Halfway distance of Spacer Guide
Figure 5-29
Track Rail Alignment
one track aligns with the center line on the Spacer Guide and the center of the other track
aligns at the point where the Spacer Guide ends meet. The tracks should now be 180°
apart. Tighten both chains but not too tight.
Connecting
5.2 Sensor Wiring
59