Setting The Parameters - Siemens SITRANS FUP1010 Operating Instructions Manual

Connecting
5.2 Sensor Wiring
5.2.4

Setting the Parameters

Select Language and Units
Note
Before creating a site select a language and then English or Metric units from the Meter
Facilities menu.
To select English or metric units:
1. In Meter Type Menu, scroll to [Meter Facilities] menu. Press <Right Arrow> and select
2. Press <ENTER> to select. Press <Left Arrow> and <Up Arrow> to return to main menu.
Select a Meter Type
1. Press the <MENU> key and select the Meter Type.
2. Press the <Right Arrow> and scroll to [Dual Path Flow].
3. Press <ENTER> to select. The [Dual Path Flow] menu will appear.
4. Press <ENTER> to select. Press <Right Arrow> to select meter function. Press
Create a Site
1. Before proceeding make sure that English or Metric units have been selected.
2. At the [Channel Setup] menu press <Right Arrow> and then <Down Arrow> to highlight
3. Press <ENTER> to create Site name (e.g., ABC).
36
preferred units.
<ENTER>.
[Create/Name Site]. Press <Right Arrow> to enter a Site name.
FUP1010 IP67 Portable
Operating Instructions, 03/2012, A5E02951522-02