History; Further Information - Siemens SITRANS F Operating Instructions Manual

● Store the device in a dry and dust-free place.
● Keep away from direct sun and heat.
● Avoid external load to the device.
● The storage temperature range for standard devices with electrical components is -40 ...
1.4

History

The contents of these instructions are regularly reviewed and corrections are included in
subsequent editions. We welcome all suggestions for improvement.
The following table shows the most important changes in the documentation compared to
each previous edition.
Edition
02/2013
1.5

Further Information

Product information on the Internet
The Operating Instructions are available on the CD-ROM shipped with the device, and on
the Internet on the Siemens homepage, where further information on the range of SITRANS
F flowmeters may also be found:
Product information on the internet (http://www.siemens.com/flow)
Worldwide contact person
If you need more information or have particular problems not covered sufficiently by these
Operating Instructions, get in touch with your contact person. You can find contact
information for your local contact person on the Internet:
Local contact person (http://www.automation.siemens.com/partner)
SITRANS FVA250
Operating Instructions, 02/2013, A5E03821131-01
CAUTION
Insufficient protection during storage
The packaging only provides limited protection against moisture and infiltration.
 Provide additional packaging as necessary.
+70 °C / -40 ... +158 °F.
Remarks
First edition
Contents restructured
Introduction
1.4 History
7