Assembly Overview: Shock Absorber, Coil Spring (Four-Wheel Drive) - Volkswagen Jetta 2005 Workshop Manual

Golf Variant 2007 ➤ , Jetta 2005 ➤
Running gear, axles, steering - Edition 07.2010
12

Assembly overview: shock absorber, coil spring (four-wheel drive)

1 - Lower spring seat
❑ End of coil spring turned
to stop
2 - Assembly aid
❑ Not necessary to rein‐
stall once removed
3 - Coil spring
❑ Note different running
gear versions
⇒ page 275 , vehicle
data sticker.
❑ Removing and installing
⇒ page 218 .
4 - Upper spring seat
5 - Bolt
❑ M14 x 1.5 x 70
❑ 180 Nm
6 - Bolt
❑ M10 x 35
❑ 50 Nm + 45° further
❑ Always renew after re‐
moving.
7 - Shock absorber
❑ Removing and installing
⇒ page 220 .
❑ Repairing ⇒ page 222
❑ Note different running
gear versions
⇒ page 275 , vehicle
data sticker.
8 - Washer
9 - Lower transverse link
❑ Removing and installing
10 - Wheel bearing housing
❑ Removing and installing
12.1 Removing and installing coil spring
Special tools and workshop equipment required
218
Rep. gr.42 - Rear suspension
⇒ page 199 .
⇒ page 205 .