Golf Variant 2007 ➤ , Jetta 2005 ➤
Running gear, axles, steering - Edition 07.2010
Pressing off inner constant velocity joint
– Drive joint protective boot off joint using a drift.
– Remove retaining ring.
– Remove both clamps and slide boot towards outer joint.
Assembling
Installation position of dished spring at inner joint
1 -
Dished spring
Pressing on inner constant velocity joint
Note
Chamfer on internal circumference of ball hub (splines) must face
contact shoulder on drive shaft.
– Press joint on to stop.
– Install retaining ring.
235
14. Assembly overview: drive shaft