♦ Multi-purpose tool -VW 771-
♦ Drive shaft puller -T10382-
♦ Torque wrench -V.A.G 1332-
Removing
– Loosen drive shaft bolt at wheel hub
Caution
During this step, vehicle must not be standing on its wheels.
The wheel bearing can be damaged by the weight of the vehi‐
cle if the bolt is loosened.
If a vehicle must be moved with the drive shaft removed, an
outer joint must be fitted and tightened to 120 Nm.
– Remove lower noise insulation ⇒ Rep. gr. 50 ; Assembly
overview - noise insulation .
– Remove wheel.
Running gear, axles, steering - Edition 07.2010
⇒ page 71
.
Golf Variant 2007 ➤ , Jetta 2005 ➤
6. Removing and installing drive shafts
75