Year 2008 - Volkswagen Jetta 2005 Workshop Manual

3.2 Assembly overview - steering column, Golf Variant up to model year 2009,
Jetta up to model year 2008
Note
It is not permitted to weld or straighten load-bearing or wheel-guiding components of the suspension.
♦
Always renew self-locking nuts.
♦
Always renew corroded nuts and bolts.
♦
1 - Hexagon bolt
❑ 20 Nm
2 - Cross member for steering
column
3 - Mounting bracket
❑ Removing and installing
⇒ page 321 .
4 - Bolt
❑ 20 Nm
❑ Always renew after re‐
moving.
5 - Steering column
❑ Removing and installing
⇒ page 297 .
6 - Handle
7 - Bolt
❑ 3 Nm
8 - Crash bar for brake pedal
9 - Crash bar for clutch pedal
10 - Bolt
❑ 30 Nm
❑ Always renew after re‐
moving.
11 - Strut
❑ Removing and installing
⇒ page 323 .
12 - Bolt
❑ 20 Nm
13 - Bolt
❑ 20 Nm
3.3 Removing and installing steering col‐
umn, Golf Variant up to model year
2009, Jetta up to model year 2008
Special tools and workshop equipment required
Golf Variant 2007 ➤ , Jetta 2005 ➤
Running gear, axles, steering - Edition 07.2010
3. Steering wheel, steering column
297