Volkswagen Jetta 2005 Workshop Manual page 49

– Bolt suspension link to bracket -10- and -17- in unladen state.
Continue installation in reverse order.
Note
Ensure that bellows are not damaged or twisted.
– Install lower noise insulation ⇒ General body repairs, exterior;
Rep. gr. 50 ; Assembly overview - noise insulation .
– Install wheel and tighten bolts or nuts
Specified torques
Component
Mounting bracket to bracket
♦ Use new bolts
Mounting bracket to body
♦ Use new bolts
Swivel joint to cast steel suspension link
♦ Use new nuts
Swivel joint to sheet steel or forged aluminium suspension
link
♦ Use new nuts
Suspension link to bracket
♦ Use new bolt
♦ Tighten bolt in unladen state
3.14 Removing and installing suspension link
with mounting bracket (left side for ve‐
hicles with DSG or automatic gearbox‐
es)
Special tools and workshop equipment required
Running gear, axles, steering - Edition 07.2010
⇒ page 241 .
Golf Variant 2007 ➤ , Jetta 2005 ➤
Specified torque
50 Nm + 90°
70 Nm + 90°
60 Nm
100 Nm
70 Nm + 180°
3. Subframe, anti-roll bar, suspension links
41