Golf Variant 2007 ➤ , Jetta 2005 ➤
Running gear, axles, steering - Edition 07.2010
– Remove bolt -1- for universal joint and pull universal joint -2-
off steering box.
– Remove front wheels.
– Loosen nut on track rod ball joint but do not remove complete‐
ly.
Caution
Leave nut screwed on a few turns to protect thread on pin.
– Press track rod ball joint off wheel bearing housing using ball
joint puller -3287A- and now remove nut.
– Remove lower noise insulation ⇒ Rep. gr. 50 ; Assembly
overview - noise insulation .
– Remove coupling rod from anti-roll bar.
– Remove nuts -arrows-.
– Disconnect pendulum support from gearbox by removing bolts
-14-.
354
Rep. gr.48 - Steering