Assembly Overview: Subframe, Final Drive (Four-Wheel Drive) - Volkswagen Jetta 2005 Workshop Manual

Golf Variant 2007 ➤ , Jetta 2005 ➤
Running gear, axles, steering - Edition 07.2010
9

Assembly overview: subframe, final drive (four-wheel drive)

-Arrow- indicates direction of travel.
1 - Subframe
2 - Rear bonded rubber bush
❑ Renewing ⇒ page 186
3 - Front bonded rubber bush
❑ Renewing ⇒ page 186
4 - Final drive
❑ Removing and installing
⇒ Rep. gr. 39 ; Remov‐
ing and installing rear fi‐
nal drive
5 - Bolt
❑ M12 x 105
❑ 60 Nm + 90° further
❑ Always renew after re‐
moving.
6 - Washer
❑ Installed between final
drive and subframe
7 - Washer
❑ Washer must be placed
with holes on lugs of
bonded rubber bush.
8 - Bolt
❑ M12 x 105
❑ 60 Nm + 90° further
❑ Always renew after re‐
moving.
9.1 Removing and installing rear axle
Special tools and workshop equipment required
♦ Torque wrench -V.A.G 1332-
180
Rep. gr.42 - Rear suspension
.
.