Volkswagen Jetta 2005 Workshop Manual page 134

Golf Variant 2007 ➤ , Jetta 2005 ➤
Running gear, axles, steering - Edition 07.2010
– Fit triple roller star onto shaft and press on to stop.
– Ensure that pressure does not exceed 3.0 t.
– If necessary, coat splines of drive shafts and triple roller star
with lubricating paste -G 052 142 A2- .
– Insert retaining ring, ensuring that it is seated correctly.
– Press 70 grammes of drive shaft grease from repair set into
triple roller joint.
– Slide joint body over rollers and hold.
– Press 60 grammes of drive shaft grease from repair kit into
rear of triple roller joint.
– Install joint boot.
– Install clamp.
Note
To make it easier to insert the multi-point socket-head bolts when
installing the drive shaft, position ear -arrow A- of hose clip be‐
tween mounting flanges -arrows B- of joint body.
– Tighten hose clip using hose clip pliers -V.A.G 1275- .
– Tighten small clamp using hose clip pliers -V.A.G 1275- .
126
Rep. gr.40 - Front suspension