Volkswagen Jetta 2005 Workshop Manual page 20

Golf Variant 2007 ➤ , Jetta 2005 ➤
Running gear, axles, steering - Edition 07.2010
Caution
From model year 08,
HeliCoil inserts are in‐
stalled in the pendulum
support connection in
the 02Q gearboxes.
Identification ⇒ Rep. gr.
34 .
Use a bolt with hardness
class 10.9 for this and all
other gearboxes.
If there is no HeliCoil in‐
sert in the 02Q gearbox,
use bolts with
strength class 8.8 and
the corresponding tor‐
que setting.
❑ Always renew after removing.
23 - Bracket to pendulum support
❑ Not an individual part
24 - Pendulum support
❑ Bolt first to gearbox and then to subframe
❑ Various versions
❑ Allocation ⇒ Electronic parts catalogue „ETKA"
25 - Lower bonded rubber bush for pendulum support
❑ Pressing out and in for vehicles with front-wheel drive
❑ Pressing out and in for vehicles with four-wheel drive
❑ Different versions
❑ Allocation ⇒ Electronic parts catalogue „ETKA"
26 - Shield
❑ For vehicles with front-wheel drive only
27 - Bolt
❑ 6 Nm
❑ Self-locking
28 - Subframe
❑ Various versions
❑ Removing and installing without steering box
❑ Removing and installing with steering box
❑ Allocation ⇒ Electronic parts catalogue „ETKA"
29 - Upper bonder rubber bush for pendulum support
❑ Pressing out and in for vehicles with front-wheel drive
❑ Pressing out and in for vehicles with four-wheel drive
❑ Different versions
❑ Allocation ⇒ Electronic parts catalogue „ETKA"
30 - Bolt
❑ M12 x 1.5 x 110
❑ 70 Nm + 180° further
❑ Always renew after removing.
❑ Tighten only in unladen state
12
Rep. gr.40 - Front suspension
the
⇒ page 13
⇒ page 13
⇒ page 6
⇒ page 28
⇒ page 31
⇒ page 21
⇒ page 23
⇒ page 28
⇒ page 31