Electromechanical Steering Box From Model Year 2009 - Volkswagen Jetta 2005 Workshop Manual

5 Electromechanical steering box from
model year 2009
5.1 Assembly overview - electromechanical steering box, left-hand drive vehi‐
cle (3rd generation) from model year 2009
1 - Wiring
2 - Universal joint
3 - Bolt
❑ M8 x 35
❑ 30 Nm
❑ Always renew after re‐
moving.
4 - Torx bolt
❑ 6 Nm
❑ Self-locking
5 - Shield
6 - Power steering box
❑ With power steering
control unit -J500-
❑ With electromechanical
power steering motor -
V187-
❑ With steering torque
sender -G269-
❑ With steering angle
sender -G85-
❑ Can be checked in gui‐
ded fault finding of the
vehicle diagnostic, test‐
ing and information sys‐
tem -VAS 5051B- .
❑ Removing and installing
⇒ page 347 .
7 - Left wheel bearing housing
8 - Nut
❑ M12 x 1.5
❑ 20 Nm + 90° further
❑ Self-locking
❑ Always renew after removing.
9 - Bolt
❑ 50 Nm + 90° further
❑ Always renew after removing.
10 - Subframe
11 - Right wheel bearing housing
Golf Variant 2007 ➤ , Jetta 2005 ➤
Running gear, axles, steering - Edition 07.2010

5. Electromechanical steering box from model year 2009

345