Removing And Installing Subframe With Steering Box - Volkswagen Jetta 2005 Workshop Manual

Torque specifications for pendulum support to gearbox
Caution
From model year 08, HeliCoil inserts are installed in the pen‐
dulum support connection in the 02Q gearboxes. Identification
⇒ Rep. gr. 34 .
Use a bolt with hardness class 10.9 for this and all other gear‐
boxes.
If there is no HeliCoil insert in the 02Q gearbox, use bolts with
the strength class 8.8 and the corresponding torque setting.
Bolt
M10 x 35 strength class 8.8
♦ Use new bolt
M10 x 35 strength class 10.9
♦ Use new bolt
M10 x 75 strength class 8.8
♦ Use new bolt
M10 x 75 strength class 10.9
♦ Use new bolt
3.8 Removing and installing subframe with
steering box
Special tools and workshop equipment required
♦ Ball joint puller -3287 A-
♦ Torque wrench -V.A.G 1332-
Golf Variant 2007 ➤ , Jetta 2005 ➤
Running gear, axles, steering - Edition 07.2010
Specified torque
40 Nm + 90° further
50 Nm + 90° further
40 Nm + 90° further
50 Nm + 90° further
3. Subframe, anti-roll bar, suspension links
23