Assembly Overview: Wheel Bearing - Volkswagen Jetta 2005 Workshop Manual

4

Assembly overview: wheel bearing

1 - Suspension strut
2 - Track rod ball joint
3 - Multi-point socket head bolt
❑ Tip of bolt must point in
direction of travel
4 - Hexagon socket head bolt
❑ 8 Nm
5 - Front left speed sensor -
G47- / front right speed sensor
-G45-
❑ Before inserting speed
sensor, clean inner sur‐
face of fitting hole and
coat with lubricating
paste -G 000 650- .
6 - Splash plate
7 - Nut
❑ M12 x 1.5
❑ 20 Nm + 90° further
❑ Self-locking
❑ Always renew after re‐
moving.
8 - Bolt
❑ 10 Nm
9 - Ventilated brake disc
10 - Bolt
❑ M16 x 1.5 x 80
❑ Hexagon bolt, 200 Nm
and turn +180° further
❑ 12-point bolt, 70 Nm +
90° further
❑ Always renew after removing.
When bolt is loosened or tightened, vehicle must not be standing on its wheels
11 - Bolt
❑ Torque settings ⇒ Brake systems; Rep. gr. 46 ; Repairing front brake
12 - Wheel hub with wheel bearing
❑ The ABS sensor ring is installed in the wheel hub
❑ Various versions
❑ Allocation ⇒ Electronic parts catalogue „ETKA"
13 - Wheel bearing housing
❑ Removing and installing
❑ With bolted-on brake carrier.
❑ If wheel bearing housing is renewed, wheels must be aligned
❑ Allocation ⇒ Electronic parts catalogue „ETKA"
14 - Wheel bearing housing
❑ Removing and installing
Running gear, axles, steering - Edition 07.2010
⇒ page 58 .
⇒ page 58 .
Golf Variant 2007 ➤ , Jetta 2005 ➤
⇒ page 261 .
4. Assembly overview: wheel bearing
55