Volkswagen Jetta 2005 Workshop Manual page 35

– Secure subframe to engine and gearbox jack -V.A.G 1383 A-
with the appropriate strap.
Installing
Install in reverse order.
– Install noise insulation and tighten, torque settings ⇒ General
body repairs, exterior; Rep. gr. 50 ; Assembly overview - noise
insulation.
Specified torques
Component
Swivel joint to cast steel suspension link
♦ Use new nuts
Swivel joint to sheet steel or forged aluminium suspension
link
♦ Use new nuts
Subframe to body
♦ Use new bolts
Mounting bracket to body
♦ Use new bolts
Bracket to body
♦ Use new bolts
Anti-roll bar to coupling rod
♦ Use new nut
♦ Counterhold on multi-point socket of joint pin
Track rod ball joint to wheel bearing housing
♦ Use new nut
Universal joint to steering box
♦ Use new bolt
Exhaust system bracket to subframe
⇒ Engine; Rep. gr. 26
Torque specifications for pendulum support to gearbox
Caution
From model year 08, HeliCoil inserts are installed in the pen‐
dulum support connection in the 02Q gearboxes. Identification
⇒ Rep. gr. 34 .
Use a bolt with hardness class 10.9 for this and all other gear‐
boxes.
If there is no HeliCoil insert in the 02Q gearbox, use bolts with
the strength class 8.8 and the corresponding torque setting.
Golf Variant 2007 ➤ , Jetta 2005 ➤
Running gear, axles, steering - Edition 07.2010
Specified torque
3. Subframe, anti-roll bar, suspension links
60 Nm
100 Nm
70 Nm + 90°
70 Nm + 90°
70 Nm + 90°
65 Nm
20 Nm + 90°
30 Nm
27