Volkswagen Jetta 2005 Workshop Manual page 59

– Remove bolt -1- and pull universal joint -2- off steering box.
– Remove lower noise insulation ⇒ General body repairs, ex‐
terior; Rep. gr. 50 ; Assembly overview - noise insulation .
– Detach coupling rods from anti-roll bar.
– Remove nuts -arrows-.
– Loosen nut on track rod ball joint on each side but do not re‐
move completely.
Leave nut screwed on a few turns to protect thread on pin.
– Press track rod ball joint off wheel bearing housing with ball
joint puller -3287 A- .
– Fixing position of subframe with brackets
– Unbolt anti-roll bar from subframe -11- and -16-.
– Disconnect pendulum support from gearbox by removing bolts
-14-.
Golf Variant 2007 ➤ , Jetta 2005 ➤
Running gear, axles, steering - Edition 07.2010
⇒ page 16 .
3. Subframe, anti-roll bar, suspension links
51