Assembly Overview - Steering Column, Right-Hand Drive, Jetta As Of Model Year 2009 - Volkswagen Jetta 2005 Workshop Manual

3.6 Assembly overview - steering column, right-hand drive, Jetta as of model
year 2009
Note
♦ It is not permitted to weld or straighten load-bearing or wheel-guiding components of the suspension.
Always renew self-locking nuts.
♦
Always renew corroded nuts and bolts.
♦
1 - Bolt
❑ 20 Nm
2 - Assembly carrier
3 - Bolt
❑ 20 Nm
4 - Strut
5 - Mounting bracket
6 - Bolt
❑ 20 Nm
7 - Steering column
❑ Removing and installing
⇒ page 311 .
8 - Bolt
❑ 30 Nm
❑ Always renew after re‐
moving.
9 - Crash bar for brake pedal
10 - Bolt
❑ 20 Nm
❑ Observe tightening se‐
quence ⇒ page 316
11 - Crash bar for clutch pedal
12 - Bolt
❑ 20 Nm
❑ Observe tightening se‐
quence ⇒ page 316
13 - Bolt
❑ 20 Nm
3.7 Removing and installing steering col‐
umn, right-hand drive, Jetta as of model
year 2009
Special tools and workshop equipment required
Golf Variant 2007 ➤ , Jetta 2005 ➤
Running gear, axles, steering - Edition 07.2010
3. Steering wheel, steering column
311