Volkswagen Jetta 2005 Workshop Manual page 28

Golf Variant 2007 ➤ , Jetta 2005 ➤
Running gear, axles, steering - Edition 07.2010
– Remove bolts -4- and -5- and lower subframe a maximum of
10 cm.
Note
Be sure to observe electrical wires to avoid overstretching them.
Installing
Install in reverse order.
– Install lower noise insulation ⇒ General body repairs, exterior;
Rep. gr. 50 ; Assembly overview - noise insulation .
Note
Ensure that bellows are not damaged or twisted.
Specified torques
Component
Subframe to body
♦ Use new bolts
Subframe to bracket
♦ Use new bolts
Anti-roll bar to coupling rod
♦ Use new nut
♦ Counterhold on multi-point socket of joint pin
Universal joint to steering box
♦ Use new bolt
Exhaust system bracket to subframe
⇒ Engine; Rep. gr. 26
Torque specifications for pendulum support to gearbox
Caution
From model year 08, HeliCoil inserts are installed in the pen‐
dulum support connection in the 02Q gearboxes. Identification
⇒ Rep. gr. 34 .
Use a bolt with hardness class 10.9 for this and all other gear‐
boxes.
If there is no HeliCoil insert in the 02Q gearbox, use bolts with
the strength class 8.8 and the corresponding torque setting.
Bolt
M10 x 35 strength class 8.8
♦ Use new bolt
M10 x 35 strength class 10.9
♦ Use new bolt
20
Rep. gr.40 - Front suspension
Specified torque
70 Nm + 90°
70 Nm + 90°
65 Nm
30 Nm
Specified torque
40 Nm + 90° further
50 Nm + 90° further