Log Into Webmin - GE CARESCAPE Monitor B850 Technical Manual

Admit settings
Patient ID prefix
Barcode settings
4-14
3. On the MUSE/12SL window, enter the following:
MUSE Web Username
MUSE Web Password
Confirm Password
MUSE Web URL
4. Select Save.
The MUSE settings take effect immediately after they are submitted.
The patient ID prefix is used as the first two characters when generating temporary
patient IDs to ensure that the patient ID is unique.
1. If you have not already done so,
Configuration tab.
2. On the Configuration tab, select Admit Settings.
3. On the Sub-Modules for Admit Settings menu, select Patient ID.
4. On the Patient ID Prefix window, enter a 2-character prefix.
NOTE
Valid values are uppercase letters and numbers.
5. Select Submit.
All changes take effect immediately.
Barcode settings must be configured if a barcode reader is used to input patient data to
the Admit/Discharge menu.
NOTE
For details on barcode data requirements and restrictions, see
specifications" on page 4-19.
1. Select the parser type.
a. If you have not already done so,
the Configuration tab.
b. On the Configuration tab, select Admit Settings.
c. On the Sub-Modules for Admit Settings menu, select Barcode Settings.
d. Under Barcode Setup on the Barcode Settings window, select the applicable
CARESCAPE Monitor B850

"Log into Webmin"

on page 4-4 and select the
"Log into Webmin" on page 4-4 and select
"Barcode data
2040384-004D