Installing The Bluetooth Deskjet Printer; Connecting The Bluetooth Dongle Into The System - GE LOGIQ P9 Service Manual

GERAFT
D 5604324, R
IRECTION EVISION
3-8-3

Installing the Bluetooth Deskjet Printer

1) Power off/Shutdown the system as described in:
2) Physically connect the Bluetooth dongle as described on
After boot up of the system, verify the correct connection of Bluetooth device driver on the maintenance
NOTICE
mode, see:
!! NOTICE:
Printer and connect the Bluetooth Printer Adapter"
printer.
3-8-3-1

Connecting the Bluetooth Dongle into the System

1) Connect Bluetooth Dongle into the available USB port. There are three available USB ports on the
system. :
USB 2.0 port: Two hub ports for service and user
3-34
11 DRAFT (J
Section 3-8-3-2 "Verifying Bluetooth device driver"
Section 3-9-2 "External I/O Connectors"
Figure 3-20 External I/O Connectors - on Rear of System
Figure 3-21 External I/O Connector
Section 3-8 - Printer Installation
24, 2019)
ANUARY
Section 3-7-3 on page
Section 3-8-3-1 on page
and, see:
for Bluetooth pairing between the system and
.
USB-2.0 Port
.
LOGIQ P9/P7
S M
ERVICE ANUAL
3-25.
3-34.
Section 3-8-3-3 "Prepare the