Replace The Cover On The Unit - GE CARESCAPE Monitor B850 Technical Manual

Replace the cover on the unit

Recommended checkout
9-10
1. Fasten the rear panel to the back of the unit with the 7 screws.
2. Fasten the two power cord retainers to the unit with 2 screws.
3. Slide the top cover onto the top of the unit.
4. Replace the 8 screws that connect the cover to the sides of the unit.
5. Perform the "Electrical safety tests"
Perform the recommended checkout procedures for the applicable FRU.
FRU description
Processor board
Power supply
Speaker
CPU battery
Enclosure
Third video card
CARESCAPE Monitor B850
on page 7-3.
Functional checkout procedures
"Electrical safety tests" on page 5-3
"Patient monitor functional tests"
"Electrical safety tests" on page 5-3
"Patient monitor functional tests"
"Electrical safety tests" on page 5-3
"Patient monitor functional tests"
"Electrical safety tests" on page 5-3
"Patient monitor functional tests"
"Visual inspection" on page 5-2
"Electrical safety tests" on page 5-3
"Patient monitor functional tests"
"Electrical safety tests" on page 5-3
"Patient monitor functional tests"
on page 7-4
on page 7-4
on page 7-4
on page 7-4
on page 7-4
on page 7-4
2040384-004D