Ping A Tcp/Ip Network Device - GE CARESCAPE Monitor B850 Technical Manual

Ping a TCP/IP network device

2040384-004D
address, IP address, power frequency, ECG filter.
Acquisition Information - E-Module Frame - serial number, EMBC serial
number, EMBC software number, EMBC software version, EMBC IP address.
Acquisition Information - Tram-Rac - software part number and version
Installed S5 Printers - name.
Installed IX Printers - name, host name or IP address.
Printer Location Information - printout type (alarm waveforms, manual
waveforms, reports, and parameters) and location.
M-Port Information - device name, software number and version, serial number
port number, active state for each serial device connected to the patient monitor,
connection type.
PDM License Information - license option, status number of license.
UNITY ID Information - product ID, Unity Network ID software number and
version, date, time, device name and software version of each device connected.
USB Port Information - product name, manufacturer, vendor code, product ID,
serial number.
Use this Webmin feature to verify connectivity with a network device on the MC
Network and IX Network.
1. Log onto Webmin.
2. Select Diagnostics > Ping.
3. In the Address to Ping field on the Ping Command window, type the IP address
of a known device on the network and select ping.
If you receive a reply, then you are able to connect to the device.
If you do not receive a reply, make sure that the patient monitor is connected to
an active network.
CARESCAPE Monitor B850 8-5