Delete Snmp Group - D-Link DGS-3100 SERIES Cli Manual

DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual

delete snmp group

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete the SNMP group named 'sg1'.
show snmp groups
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the currently configured SNMP groups on the Switch:
37
DGS3100#
To remove an SNMP group from the Switch.
delete snmp group <groupname 30>
The delete snmp group command removes an SNMP group from
the Switch.
<groupname 30> − A string of that identifies the SNMP group the
new SNMP user will be associated with. Up to 30 alphanumeric
characters.
Only administrator or operate-level users can issue this command.
DGS3100# delete snmp group sg1
Success.
DGS3100#
To display the group-names of SNMP groups currently configured
on the Switch. The security model, level, and status of each group
are also displayed.
show snmp groups
The show snmp groups command displays the group-names of
SNMP groups currently configured on the Switch. The security
model, level, and status of each group are also displayed.
None.
None.
DGS3100# show snmp groups
Vacm Access Table Settings
Group Name Model
---------------- -------- ------------ ----------- ----------- -----------
g1 V3
g2 V3
g3 V3
DGS3100#
Level ReadView
NoAuthNoPriv v1
authNoPriv v1
authPriv v1
WriteView NotifyView
v1 v1
v1 v1
v1 v1