Delete Account - D-Link DGS-3100 SERIES Cli Manual

DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual

delete account

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete the user account 'System':
enable web
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable HTTP and configure the TCP port number to listen for Telnet requests:
disable web
Purpose
Syntax
Description
17
To delete an existing user account.
delete account <username 15>
The delete account command deletes a user account that has been
created using the create account command.
<username 1-15> − the account username.
Only Administrator-level users can issue this command.
DGS3100# delete account System
Are you sure to delete the last administrator account?(y/n)
Success.
DGS3100#
To enable the HTTP-based management software on the Switch.
enable web <tcp_port_number 1-65535>
The enable web command enables the Web-based management
software on the Switch. The user can specify the TCP port number
the Switch uses to listen for Telnet requests.
<tcp_port_number 1-65535> − The TCP port number. TCP ports are
numbered between 1 and 65535. The 'well-known' port for the Web-
based management software is 80.
Only Administrator or operator-level users can issue this command.
DGS3100# enable web 80
Success.
DGS3100#
To disable the HTTP-based management software on the Switch.
disable web
The disable web command disables the Web-based management
software on the Switch.