Show Stp Mst_Config_Id - D-Link DGS-3100 SERIES Cli Manual

Parameters
Restrictions
Example usage:
To display the STP instance configuration for instance 0 (the internal CIST) on the Switch:

show stp mst_config_id

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show the MSTP configuration identification currently set on the Switch:
<value 0-15> - The value of the previously configured instance_id on
the Switch. The value may be between 0 and 15. An entry of 0
displays the STP configuration for the CIST internally set on the
Switch.
None.
DGS3100# show stp instance 0
Instance Type : CIST
Instance Status : Enabled
Instance Priority : 32768
STP Instance Operational Status
-----------------------------------------------
Designated Root Bridge
External Root Cost
Regional Root Bridge
Internal Root Cost
Root Port
Max Age
Forward Delay
Last Topology Change
Topology Changes Count : 6
DGS3100#
To display the MSTP configuration identification.
show stp mst_config_id
The show stp mst_config_id command displays the Switch's
current MSTP configuration identification.
None.
None.
DGS3100# show stp mst_config_id
Current MST Configuration Identification
----------------------------------------------------------
Configuration Name : 00:53:13:1A:33:24
MSTI ID Vid list
----------- -----------------------------------------------------------------------------------------
DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual
: 32768/00:00:b9:89:46:79
: 200012
: 32768/00:23:27:26:46:00
: 0
: 1:3
: 20
: 15
: 23542964
Revision Level :0
66