Crypto Certificate (Request) - D-Link DGS-3100 SERIES Cli Manual

DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual

crypto certificate (request)

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To generate and display certificate requests for HTTPS.:
DGS3100# crypto certificate 1 request
-----BEGIN CERTIFICATE REQUEST-----
MIIBDTCBuAIBADBTMQswCQYDVQQGEwIgIDEKMAgGA1UECBMBIDEKMAgGA1UEBxMB
IDEUMBIGA1UEAxMLMTAuNi4yMi4xMTQxCjAIBgNVBAoTASAxCjAIBgNVBAsTASAw
XDANBgkqhkiG9w0BAQEFAANLADBIAkEAw3odbbo5S4JPRz2QJKoEpTmve8WDdsm4
0nvmOpxqUDORl7TigrZfs3vGxg2Nar1RflQwKQxb7VetgxF8VeKmDQIDAQABoAAw
DQYJKoZIhvcNAQEEBQADQQB1owjB21fZvIYdBS1zJl/Hd6F2MhrzF35ULNgNHP0Z
pbtU7Y4HkyqsQzkCwDAzGD+y4YB/mu4jNxeq+Ik2UEYD
-----END CERTIFICATE REQUEST-----
Success.
DGS3100#
145
Success.
DGS3100#
To generate and display certificate requests for HTTPS.
crypto certificate <number 1-2> request {cn <common-name 1-
64> | ou <organization-unit 1-64>| or <organization 1-64> | loc
<location 1-64> | st <state 1-64>| cu <country 1-2>
The crypto certificate (request) command exports a certificate
request to a Certification Authority. The certificate request is
generated in Base64-encoded X.509 format. Before generating a
certificate request, a self-signed certificate must first be generated
using the crypto certificate generate . Be aware that you have to
reenter the certificate fields. After receiving the certificate from the
Certification Authority, use the crypto certificate import to import the
certificate into the device. This certificate replaces the self-signed
certificate.
number — Specifies the certificate number (Range: 1 - 2).
common-name — Specifies the fully qualified URL or IP address of
the device (Range: 1- 64).
organization-unit — Specifies the organization-unit or department
name (Range: 1- 64).
organization — Specifies the organization name (Range: 1- 64).
location — Specifies the location or city name (Range: 1- 64).
state — Specifies the state or province name (Range: 1- 64).
country — Specifies the country name (Range: 1- 2).
Only administrator or operator-level users can issue this command.