Config Radius - D-Link DGS-3100 SERIES Cli Manual

DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual
Example usage:
To delete previously configured RADIUS server communication settings:
DGS3100# config radius delete 10.48.74.121
Success.
DGS3100#

config radius

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the RADIUS settings:
DGS3100# config radius 10.48.74.121 key dlink default
Success.
DGS3100#
show radius
Purpose
Syntax
Description
Parameters
Restrictions
111
To configure the Switch's RADIUS settings.
config radius <server_ip> {| key <passwd 32> | auth_port
<udp_port_number 1-65535> | acct_port <udp_port_number 1-
65535>}
The config radius command configures the Switch's RADIUS
settings.
<server_ip> – The IP address of the RADIUS server.
key – Specifies that a password and encryption key are to be used
between the Switch and the RADIUS server.
•
<passwd 32> – The shared-secret key used by the
RADIUS server and the Switch. Up to 32 characters can
be used.
auth_port <udp_port_number 1-65535> – The UDP port number for
authentication requests. The default is 1812.
acct_port <udp_port_number 1-65535> – The UDP port number for
accounting requests. The default is 1813.
Only Administrator or operator-level users can issue this command.
To display the current RADIUS configurations on the Switch.
show radius
The show radius command displays the current RADIUS
configurations on the Switch.
None.
None.