Delete Trusted_Host - D-Link DGS-3100 SERIES Cli Manual

DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual

delete trusted_host

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete a trusted host with an IP address 10.48.74.121:
enable snmp traps
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable SNMP trap support on the Switch:
disable snmp traps
Purpose
Syntax
Description
Parameters
41
Total Entries: 1
DGS3100#
To delete a trusted host entry made using the create trusted_host
command above.
delete trusted_host <ipaddr>
The delete trusted_host command deletes a trusted host entry
made using the create trusted_host command above.
<ipaddr> − The IP address of the trusted host.
Only administrator or operator level users can issue this command.
DGS3100# delete trusted_host 10.48.74.121
Success.
DGS3100#
To enable SNMP trap support.
enable snmp traps
The enable snmp traps command enables SNMP trap support on
the Switch.
None.
Only Administrator or operator-level users can issue this command
DGS3100# enable snmp traps
Success.
DGS3100#
To disable SNMP trap support on the Switch.
disable snmp traps
The disable snmp traps command disables SNMP trap support on
the Switch.
Only Administrator or operator-level users can issue this command