D-Link DGS-3100 SERIES Cli Manual page 168

Parameters
Restrictions
Example usage:
To configure the password for the 'local_enable' authentication method.
of no more than 15 alphanumeric characters, and finally prompted to
enter the new password again for confirmation. See the example
below.
None.
Only administrator-level users can issue this command.
DGS3100# config admin local_enable
Enter the old password:
Enter the case-sensitive new password:******
Enter the new password again for confirmation:******
Success.
DGS3100#
DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual
160