Clear Arptable - D-Link DGS-3100 SERIES Cli Manual

DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual

clear arptable

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To remove dynamic entries in the ARP table:
DGS3100# clear arptable
Success.
DGS3100#
131
To remove all dynamic ARP table entries.
clear arptable
The clear arptable command is used to remove dynamic ARP table
entries from the Switch's ARP table. Static ARP table entries are not
affected.
None.
Only Administrator or operator-level users can issue this command.