Show Link_Aggregation - D-Link DGS-3100 SERIES Cli Manual

show link_aggregation

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display Link Aggregation configuration:
Success.
DGS3100#
To display the current link aggregation configuration on the Switch.
show link_aggregation {group_id <value 1-32>}
The show link_aggregation command displays the current link
aggregation configuration of the Switch.
group_id <value 1-32> − Specifies the group ID. The Switch allows
up to 32 link aggregation groups to be configured. The group
number identifies each of the groups.
None.
DGS3100# show link_aggregation
Group ID : 1
Member Port : 5-7,9
Active Port :
Status : Disabled
DGS3100#
DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual
96