Enable Stp - D-Link DGS-3100 SERIES Cli Manual

DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual
Restrictions
Example usage:
To set the Switch globally for the Multiple Spanning Tree Protocol (MSTP):

enable stp

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable STP, globally, on the Switch:
disable stp
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable STP on the Switch:
63
the Switch.
rstp – Sets the Rapid Spanning Tree Protocol (RSTP) globally on
the Switch.
stp – Sets the Spanning Tree Protocol (STP) globally on the Switch.
Only administrator or operator-level users can issue this command.
DGS3100# config stp version mstp
Success.
DGS3100#
To globally enable STP on the Switch.
enable stp
The enable stp command sets the Spanning Tree Protocol to be
globally enabled on the Switch.
None.
Only administrator or operator-level users can issue this command.
DGS3100# enable stp
Success.
DGS3100#
To globally disable STP on the Switch.
disable stp
The disable stp command sets the Spanning Tree Protocol to be
globally disabled on the Switch.
None.
Only administrator or operator-level users can issue this command.
DGS3100# disable stp