Save - D-Link DGS-3100 SERIES Cli Manual

Parameters
Restrictions
Example usage:
To disable HTTP-based management software on the Switch:

save

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To save the Switch's current configuration to non-volatile RAM:
reboot
Purpose
Syntax
Description
Parameters
None.
Only Administrator or operator-level users can issue this command.
DGS3100# disable web
Success.
DGS3100#
To save changes in the Switch's configuration to non-volatile RAM.
save
The save command saves the current switch configuration to non-
volatile RAM. The saved switch configuration is loaded to the
Switch's memory each time the Switch is restarted.
None.
Only administrator-level users can issue this command.
DGS3100# save
verwrite file [startup-config] ?[Yes/press any key for
no]....01-Jan-2000 19:03
:59 %COPY-I-FILECPY: Files Copy - source URL
running-config destination URL flas
h://startup-config
01-Jan-2000 19:04:06
operation was completed successfully
Copy succeeded
Success.
DGS3100#
To reboot the Switch. If the Switch is a member of a stack, it may be
rebooted individually, without affecting the other members of the
stack.
reboot <box_id 1-6>
The reboot command restarts the Switch.
<box_id 1-6> − The unit's current stack membership number.
DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual
%COPY-N-TRAP: The copy
18