Reset - D-Link DGS-3100 SERIES Cli Manual

DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual
Restrictions
Example usage:
To restart the Switch unit 1:

reset

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To restore all of the Switch's parameters to their default values:
login
Purpose
Syntax
Description
19
Only Administrator or operate-level users can issue this command.
DGS3100# reboot 1
Are you sure you want to proceed with system reboot
now? (Y/N)[N] Y
This action may take a few minutes
DGS3100#
To reset the Switch to the factory default settings.
reset
The reset command restores the Switch's configuration to the
default settings assigned from the factory. Execution of the reset
command through the CLI retains the unit's current stack
membership number.
None.
Only administrator-level users can issue this command.
DGS3100# reset
Please be aware that all configuration will be reset to
default value.
Are you sure you want to proceed with system reset
now? (Y/N)[N] Y
Deleting auto update backup file...OK
Deleting auto update instruction file...OK
Deleting startup configuration file... Done.
Please make sure that your terminal is set to the default
baud rate - 9600 bps.
This action may take a few minutes
Success.
DGS3100#
To log in a user to the Switch's console.
login
The login command initiates the login procedure. The user is
prompted for the Username and Password.