rebootxscf(8) command, so they cannot communicate.
[SPARC M10-1]
■
If firmware update to the version of XCP 2070 or earlier is executed when the
physical partition (PPAR) is powered on, the logical domains may stop.
Be sure to execute firmware update when the physical partition (PPAR) is
powered off. See "RTIF2-131004-001" of
issue.
The XSCF user account's user privilege, managed by the LDAP server which is
■
specified by either by the setldap(8) command, or by specifying [XSCF] - [Setting]
- [User Manager] - [LDAP] on the XSCF Web, cannot be set up with [XSCF] -
[Setting] - [User Manager] - [Account] on the XSCF Web. Set up user privilege
with the setprivileges(8) command on XSCF shell prompt.
XCP 2240 Problems and Workarounds
See
"Problems that might occur with XCP 2240 and
problems that can occur with XCP 2240. See
information on problems resolved in XCP 2240.
Fujitsu M10/SPARC M10 Systems Product Notes for XCP Version 2240 ・ March 2015
32
"Problems resolved in XCP
workarounds" for information on
"Problems resolved in XCP
2070" for this
2240" for