Fujitsu M10 Product Notes page 190

An error occurs in executing the scp(1), sftp(1), or ssh(1)
command of Oracle Solaris or the installation of Oracle RAC
fails (CR:15825208)
[Workaround]
Using the following procedure, change the setting so that the AES_CTR, AES_CBC_
MAC, and AES_CFB128 algorithms are not used with the assist function of the
encryption unit.
If you use it with the client function (scp(1), sftp(1), ssh(1), etc.):
■
1. Add the content of the setting to the target file as one line. A space is
Ciphers aes128-cbc,aes192-cbc,aes256-cbc,3des-bc,arcfour128,
arcfour256,arcfour,blowfish-cbc
If you use it with the server function (sshd(1M) etc.):
■
1. Add the content of the setting to the target file as one line.
Ciphers 3des-cbc,arcfour128,arcfour256,arcfour,blowfish-cbc
2. Restart the service with the following command:
# svcadm restart svc:/network/ssh:default
If the problem cannot be resolved with any of the client function and server
■
function:
1. Add the following, in place of the above content of the setting:
UseOpenSSLEngine no
Fujitsu M10/SPARC M10 Systems Product Notes for XCP Version 2240 ･ March 2015
176
necessary only between "Cipher" and "aes128-cbc."
- Target file
Settings for entire system: /etc/ssh/ssh_config
Settings per user: $HOME/.ssh/ssh_config
- Setting contents
- Target file
/etc/ssh/ssh_config
- Setting contents (recommended)